Smart-Bus IR Emitter with Current Sensor (G4) - SB-IR-UN

Product viewed: 2116
$74.00
Ex Tax: $74.00

Universal Infra Red code Emitter with built in 2A current sensor and cyclic function. The innovative current sensor Idea check if the electronic equipments is running or is turned off to prevent sending Power Toggling IR code as example. Each module Can save up to 255 IR codes then can be used for Home theater equipment, HVAC, Media
systems at living rooms, Curtains control, and several other devices.

**Added function: Bigger screw terminals, Broadcast button, and mini USB firmware upgrade port.

Control Compatibility:

• all standard universal IR enabled equipment (that can be controlled using IR signals)

Connection Port:

Smart-Bus IR Emitter with Current Sensor (G4) - SB-IR-UN - GTIN (UPC-EAN): 0610696253774

WHY G4 (GENERATION-4) IS BETTER? 4Z, AND IR EMITTER (W/CURRENT SENSOR)

4Z/IR Modules (Features compared)

Old Smart-BUS

New S-BUS G4

Upgrading without opening the Device

Not Possible

By Mini USB

Broadcast Button for addressing while Networked

Not Possible

Available

Big Easy Screw Terminals to connect Cables

Too Small

Bigger Size

PCB Electronics Design Complexity

Random

Organized

Updated Channel Operation status on DLP and SW if Manually Changed with 2way switch function

Not Available

Available

Easy Twist to Open Design

Not Possible

Available

Easy Backup and Restore using Configuration SW

Not Available

Available

Work on Both BUS and Cloud Technology

Not Possible

Possible

Genuine Patent and Brand Embedded into all Parts and Plastics

Not Available

Available

Genuine Product Barcode GTIN, and Holographic Label Distinguisher

Not Available

Available

All Other Standard Smart-BUS Advanced Automation Features

Included

Included



TECHNICAL DATA:

Universal Coded
IR Emitter can save up to 255
universal unique IR codes

Current Sensor
Accept 2A Maximum Load,
used usually to detect if equipment
is operational or off, like
TV, DVD, Set top Box ++

Macro Function
If used with SB-Logic2-DN, the
following functionalities can be
acquired: multi systems Macro
ability, Cyclic Start point ability
to reset macro even if changed
manually by user using his remotes.
(e,g. Watch DVD, Listen
to Music, Watch TV)

Control IO
1 x Advanced RS485 S-BUS
serial port links (both train &
screw link types)

Upgrade IO
1 x mini USB port (to connect to
special programming board)

User Controls
• LED status indicator/channel
• Diagnostic LED+ BROADCAST

Programming
• Advanced Software Configuration
& Programming

Compliance
CE Mark EMC

Operation Protection
• BUS Rv. Polarity Protection
• BUS Short Circuit Protection

Applications
The IR Emitter has successfully
proved its ability in control of
many 3rd party IR controlled
systems like: HVAC, Curtains,
Drapes, TV's, DVD's, Set Top
Sat Boxes, Stereo equipment,
AV receivers, Projectors...etc.

IR code learning
Must use SBIRL-kit "IR-learner"
to encode all devices IR
needed.

SBUS DC Supply
24VDC with flexible tolerance
between 8-32VDC. Flexible
ability to add power supply as
to be needed any where
Power consumption: 15mA

Installation
• universal Mount Ready

Operating Environment
0º to 45ºC ambient temperature
20% to 93% RH

Enclosure material
Polycarbonate,

Dimensions & Weight
W 46mm x L 46mm x H 16mm
Packed weight 0.06 kg

Q. How many IR codes Can the IR emitter save?
A. 255

Q. up to what range can IR emitter send IR signal?
A. up to 6 meters

Q. What is the Load designed to be read accurately by the current sensor that is built-in the IR emitter?
A. up to 2Amp the reading is accurate. Usually all electronics like TV, DVD ++ are below this thresh hold.

Q. Can the IR emitter perform Macro functions?

A. if you have logic module installed, then any IR-emitter can perform the Macro function.

Smart-Bus IR Emitter with Current Sensor (G4) - SB-IR-UN - GTIN (UPC-EAN): 0610696253774

Smart-Bus IR Emitter with Current Sensor (G4) - SB-IR-UN - GTIN (UPC-EAN): 0610696253774

Softwares and Firmwares

Applications

The IR Emitter has successfully proved its ability in control of many 3rd party IR controlled systems like: HVAC, Curtains, Drapes, TV's, DVD's, Set Top Sat Boxes, Stereo equipment, AV receivers, Projectors...etc.

 
 
 
 
 
 
 
 

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



×
×
×
×
×
×
×